Services on Demand
Journal
Article
Indicators
- Cited by SciELO
- Access statistics
Related links
- Cited by Google
- Similars in SciELO
- Similars in Google
Share
DYNA
Print version ISSN 0012-7353On-line version ISSN 2346-2183
Abstract
PINEDA-ZAPATA, Uriel and DAZA-FERNANDEZ, Juan Fernando. Design and validation of a prototype to calibrate the pressure variable in tonometry. Dyna rev.fac.nac.minas [online]. 2021, vol.88, n.218, pp.185-193. Epub Mar 28, 2022. ISSN 0012-7353. https://doi.org/10.15446/dyna.v88n218.91715.
This paper corresponds to the results of an experimental research that to led to the design of a useful prototype for quality control of measurements in the field of tonometry to diagnose and check glaucoma. All tonometry techniques are based on Goldmann´s tonometers (GT) and the Imbert-Fick principle. Taking into account the principles and techniques of industrial metrology, the prototype could be used as a standard to calibrate the pressure readings of this class of tonometers. The developed protoype eliminates the indirect measurement that is required with current standards and facilitates a greater control of the sources of error in the measurement. The model is based on the integration of a sensor to a hydraulic model to measure pressures from 0 to 80 mmHg range, whose precision was validated through R&R studies. The precision of the prototype was validated according to the Rigel UNI-SIM standard and was complemented by calibrating 15 tonometers.
Keywords : tonometry; metrology; uncertainty in measurement; calibration.