Abstract

OSORIO, Julián D.; LOPERA-VALLE, Adrián; TORO, Alejandro  and  HERNANDEZ-ORTIZ, Juan P.. Phase transformations in air plasma-sprayed yttria-stabilized zirconia thermal barrier coatings. Dyna rev.fac.nac.minas [online]. 2014, vol.81, n.185, pp.13-18. ISSN 0012-7353.  https://doi.org/10.15446/dyna.v81n185.33409.

Phase transformations in air plasma-sprayed thermal barrier coatings composed of ZrO₂ - 8 wt.% Y₂O₃ (zirconia - 8 wt.% yttria) are studied using X-Ray diffraction and Rietveld refinement measurements. Samples of TBC deposited onto Inconel 625 substrate were fabricated and heat treated at two different conditions: exposition to 1100ºC up to 1000 hours and exposition to temperatures between 700ºC and 1100ºC during 50 hours. According to Rietveld refinement measurements, the content of the cubic phase in the top coat increases with time and temperature; it starts at 7.3 wt.% and reaches 15.7 wt.% after 1000 hours at 1100ºC. The presence of a cubic phase in high amounts is undesirable due its lower mechanical properties compared with the tetragonal phase. After 800 hours of exposure to high temperature, the amount of Y²O³ in the tetragonal phase reduces to 6.6 wt.% and a fraction of this phase transforms to a monoclinic structure during cooling. The monoclinic phase reached 18.0 wt.% after 1000 hours. This phase is also undesirable, not only due to its higher thermal conductivity, but also because the tetragonal-to-monoclinic transformation implies a volume change of circa 5%, which favors crack formation and propagation and compromises the coating integrity.

Keywords : Thermal Barrier Coating (TBC); Heat Treatment; Phase Transformation; Rietveld Analysis.

        · abstract in Spanish     · text in English     · English ( pdf )