Services on Demand
Journal
Article
Indicators
- Cited by SciELO
- Access statistics
Related links
- Cited by Google
- Similars in SciELO
- Similars in Google
Share
DYNA
Print version ISSN 0012-7353On-line version ISSN 2346-2183
Abstract
VILLEGAS R., BEATRIZ; TORO B., MAURICIO and VELEZ U., JAIME I.. OPTIMUM GRID SIZE AND TIME STEP DEFINITION IN A NUMERICAL MODEL: PORCE II CASE STUDY. Dyna rev.fac.nac.minas [online]. 2005, vol.72, n.147, pp.23-32. ISSN 0012-7353.
Among the activities carried out for the numerical simulation of the thermal structure of a tropical reservoir, in this paper a procedure has been defined for the geometric and computing time interval model parameterization based on the development of a sensitivity analysis of those parameters. For the geometric parameterization the sensitivity analysis of the model is concentrated on the grid size, first in the horizontal plane followed by one in the vertical direction. Effects of the different grid sizes are measured through statistical tests comparing globally the model results for each grid size with the results obtained for a grid chosen as the reference grid. For the computing time interval a similar procedure was used in the optimal time step determination by changing the time step size. Numerical simulations were carried out with the ELCOM (Estuary and Lake Computer Model) computational model developed by the Center of Water Research (CWR) of the University of Western Australia. The application test was for the Porce II reservoir in the province of Antioquia in Colombia for which a hypothetical scenario was defined. The sensitivity analysis is based on the statistics parameters Root Mean Square Error (RMS) and the variation coefficient (CV).
Keywords : Numerical Models; Sensibility Analysis; Reservoir Applications.