Services on Demand
Journal
Article
Indicators
- Cited by SciELO
- Access statistics
Related links
- Cited by Google
- Similars in SciELO
- Similars in Google
Share
DYNA
Print version ISSN 0012-7353
Abstract
PRADO, Néstor I.; CARRILLO, Julián; OSPINA, Gustavo A. and RAMIREZ-AMAYA, Dario. Experimental assessment of I-shaped steel beams with longitudinal stiffeners under lateral-torsional buckling. Dyna rev.fac.nac.minas [online]. 2018, vol.85, n.207, pp.278-287. ISSN 0012-7353. https://doi.org/10.15446/dyna.v85n207.71892.
This study focused on the experimental assessment of the behavior of I-shaped steel beams with longitudinal stiffeners under the action of lateral-torsional buckling. Thirty-three IPE-140 steel beams with and without longitudinal stiffeners were tested under simple-support conditions with a laterally unbraced length ranging from 0.69 to 6.0 m. The stiffeners spacing was 0.42 m, which represented three times the depth of the section. The structural behavior of the beams is discussed in terms of their flexural capacity, the lateral displacement of the compression flange and the failure twist angle. The results showed that the use of longitudinal stiffeners increased the flexural capacity up to 82%, decreased the lateral displacement of the compression flange and the failure twist angle up to 72 and 90% respectively, with respect to the specimens without stiffeners.
Keywords : longitudinal stiffeners; lateral-torsional buckling; lateral displacement; laterally unbraced length; I-shaped beam; failure twist angle; flexural capacity.