Services on Demand
Journal
Article
Indicators
- Cited by SciELO
- Access statistics
Related links
- Cited by Google
- Similars in SciELO
- Similars in Google
Share
DYNA
Print version ISSN 0012-7353On-line version ISSN 2346-2183
Abstract
BOAS, Daniel Villas et al. Strategy of numerical modelling for band saw blade on wood logs cutting. Dyna rev.fac.nac.minas [online]. 2023, vol.90, n.229, pp.75-80. Epub Apr 03, 2024. ISSN 0012-7353. https://doi.org/10.15446/dyna.v90n229.107968.
The band saw blade, used on the wood log cutting, is exposed in service manufacturing to applications which can cause mechanical damages and affect the quality of the tool and the wood produced. To related applications, the shear stress is essential to the correct wood machining. the proposal of this paper was the numerically analyze the influence of the parallel shear force, applied vertically at the saw blade tooth, in response to the normal longitudinal tensions (σy) in service. A numeric model was constructed, by using of the commercial software based on the Finite Elements Method (FEM). In a first analysis, only a tensile stress was applied to the model on the upper edge of the blade, the deformation results obtained were used in the secondary analysis, with the simultaneous application of vertical point loads on the saw teeth.
Keywords : wood cutting; saw blade; shear force; numerical analysis.