Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Citado por Google
- Similares en SciELO
- Similares en Google
Compartir
Revista EIA
versión impresa ISSN 1794-1237versión On-line ISSN 2463-0950
Resumen
VELEZ-QUIMBAYA, Elver Fabián; OYOLA-LOZANO, Dagoberto; ROJAS-MARTINEZ, Yebrail y BUSTOS-RODRIGUEZ, Humberto. Study Of Magnetic And Structural Properties Of Powders Of The Fe90Al10 System Obtained By Mechanical Alloying. Rev.EIA.Esc.Ing.Antioq [online]. 2020, vol.17, n.34, pp.234-239. Epub 05-Sep-2021. ISSN 1794-1237. https://doi.org/10.24050/reia.v17i34.1382.
In this work we report the study of the magnetic and structural properties of the Fe90Al10 system obtained by mechanical alloying, for the manufacture of targets that will be used to produce thin films by sputtering. Samples in powder form were prepared using the Mechanical Alloying technique with a mass ratio of balls / sample mass, of 10: 1, in an argon atmosphere with stainless steel balls and jugs of the same material, and with 48 and 72 milling hours. Magnetic and structural characterization was performed by Mössbauer Spectroscopy (MS), Vibrating Sample Magnetometry (VSM) and X-Ray Diffraction (XRD). The Mössbauer spectrum of the powders was adjusted with a ferromagnetic component corresponding to three ferromagnetic sites showing an average hyperfine field of 29.1 T for the samples with 48 hours of milling and 25.4 T for the samples with 72 hours of milling The refinement of the XRD patterns was performed using the Rietveld method by means of the GSAS program showing in all diffractograms the FeAl-BCC phase with lattice parameters 2.886 Å and 2.889 Å for the milling of 48 and 72 hours respectively. The hysteresis cycles of the Fe90Al10 system under study show that it is a magnetically soft material.
Palabras clave : Mechanical Alloying; Mössbauer Spectroscopy; X-Ray Diffraction; Vibrating Sample Magnetometry.