SciELO - Scientific Electronic Library Online

 
vol.2 número1INTERPRETACIÓN ESTRUCTURAL DEL ÁREA ALREDEDOR DE LOS CAYOS QUITASUEÑO Y SERRANA, EN EL CARIBE, COSTA AFUERA DE COLOMBIAFENÓMENO DE INMISCIBILIDAD EN PELÍCULAS DE POLIETILENO RAMIFICADO DE BAJA DENSIDAD, PEED, EN PROCESOS DE EXTRUSIÓN DE PELÍCULA SOPLADA índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


CT&F - Ciencia, Tecnología y Futuro

versión impresa ISSN 0122-5383versión On-line ISSN 2382-4581

Resumen

LATORRE, G. MODELS TO PREDICT CREEP BEHAVIOR OF HK-40 STEEL. C.T.F Cienc. Tecnol. Futuro [online]. 2000, vol.2, n.1, pp.95-109. ISSN 0122-5383.

An analysis was conducted on the creep behavior of HK.40 steel. This steel is high heat resistant, aged during service, under the conditions of a petrochemical furnace. The different models that describe its creep behavior are discussed. The tests were carried out under a constant load intending to simulate the operating conditions of a catalytic reforming furnace. Among the models proposed in the literature, the models of Degui, Jaske-Simonen, Larson-Miller, Manson-Haferd and Snedden were applied. Another model is proposed to account for the three stages of creep. The samples of the material have had from 74 to 88 thousand hours of service and are tested at a constant load until rupturing.

Palabras clave : creep; tensile stress; deformation.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons