SciELO - Scientific Electronic Library Online

 
 número28Una Aproximación Multi-Agente para el Soporte al Proceso de Extracción-Transformación-Carga en Bodegas de DatosEspermicidas: Una Alternativa de Anticoncepción para Considerar índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


TecnoLógicas

versión impresa ISSN 0123-7799versión On-line ISSN 2256-5337

Resumen

JARAMILLO-ZAPATA, Leyla Y.  y  PATINO-ARCILA, Iván D.. Selection of Unsaturated Polyester Resins for Closed Resin Transfer Moulding Processes. TecnoL. [online]. 2012, n.28, pp.109-127. ISSN 0123-7799.

In this paper three commercial unsaturated polyester resins of wide use in Colombia are analyzed and it is evaluated the convenience of their use in resin transfer molding processes according to viscosity and reactivity criteria. The resin viscosities are compared between 15 and 50°C, in the same way as the reactivity by mean of the curing curves at room temperature, using catalyst at 1, 1.5 and 2%. In agreement with the results, it was determined that some resins are suitable for RTM process, because of their appropriate viscosity, consistent reactivity and curing velocity. These features are of great importance in the unsaturated polyester resin selection, according to conditions of closed mold processes.

Palabras clave : Unsaturated polyester resin; RTM process; viscosity; curing.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons