Resumen

VELASQUEZ-SANTOS, Carlos O.  y  ACEVEDO-ALVAREZ, Carlos A.. Process for dehydration of oregano using propane gas as fuel. TecnoL. [online]. 2014, vol.17, n.33, pp.13-20. ISSN 0123-7799.

The article describes two important issues, the first is the process to design, implement and validate a mechanical dryer of oregano, using propane gas as fuel, and the second is the cost of the process of dehydrated, taking into account the cost of electric energy consumption by the fan and the cost of propane gas consumption by the heat exchanger. To achieve this, it was necessary review the state of the art and the study of the raw material (oregano), were established as premises of design the necessary technical specifications and the variables involved in the process, using conceptual methods and simulation to ensure that it complies with the ISO standard 7925:1999, which defines the requirements for the marketing of dried oregano and processed. Emphasis was made on the percentage of moisture that is 10%, the moisture of the product was found by the azeotropic distillation method, subsequently was validated the functionality and efficiency, comparing the results from an experimental design, then it was obtained the drying curve of oregano with the prototype of drying and it was checked if it meets ISO 7925:1999 standard and the NTC 4423 standard in order to obtain a final product dehydrated with the percentage of humidity appropriate.

Palabras clave : Drying; oregano; propane gas; mechanical dryer; cost.

        · resumen en Español     · texto en Español     · Español ( pdf )