Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Citado por Google
- Similares en SciELO
- Similares en Google
Compartir
Revista EIA
versión impresa ISSN 1794-1237versión On-line ISSN 2463-0950
Resumen
GOMEZ, Maryory Astrid y RESTREPO, José William. MARCADO CON LÁSER SOBRE CERÁMICA VIDRIADA POR APORTE SUPERFICIAL DE UN PIGMENTO DE COBALTO. Rev.EIA.Esc.Ing.Antioq [online]. 2008, n.9, pp.113-120. ISSN 1794-1237.
Laser materials processing has great application to industrial scale, to print graphic patterns on ceramics surfaces. The fast implementation of this process is due to the fact that, with respect to the conventional baking process, has advantages, such as: heat is concentrated only in the radiated zone that involves a smaller energy consumption without affecting significantly the rest of the piece, graphic patterns with of highly spatial resolution are obtained, it permits to introduce changes during the process without requiring long stops, and low or almost none generation of residues. In this study the results obtained from Nd:YAG (λ=1064 nm) laser glazing on the enameled surfaces of glazed tiles, which were previously covered with black of cobalt pigment, are presented. With the laser operating in continuous wave (CW), a series of lines were marked, whose width and depth showed a direct dependence with the variation in the power and scan speed of the laser beam on the surface of the glazed tile. Finally, these glazed lines were characterized by optical microscopy, energy dispersion spectroscopy (EDS), and X-ray diffraction (XRD).
Palabras clave : ceramic glazes; laser vitrification; ceramics for construction; pigment of cobalt; laser cladding.