Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Citado por Google
- Similares en SciELO
- Similares en Google
Compartir
DYNA
versión impresa ISSN 0012-7353versión On-line ISSN 2346-2183
Resumen
FERNANDEZ M., PATRICIA; MARTINEZ, VLADIMIR; DUQUE, ANDRÉS y CRUZ, JAVIER. LOST FOAM CASTING PROCESS FOR AUTOMOTIVE PARTS MANUFACTURE. Dyna rev.fac.nac.minas [online]. 2007, vol.74, n.151, pp.15-24. ISSN 0012-7353.
At present, Lost Foam Casting (LFC) is one of the foundry processes preferred to manufacture intricate geometry, narrow dimensional tolerances and good superficial finished. Cobral Ltda. is a metal-mechanic sectors company located in Medellín City and since the year 2000 is dedicated to produce automotive parts in grey and nodular iron by LFC process. However, from the process was starting up, high percentages of rejection was obtained, between 20% and 50%. The study of the process variables and their proper control in the different stages, allowed the rejection percentages minimization and an increase in the plant productivity. The LFC process stages and some relevant aspects about the optimization that was carried out, are described.
Palabras clave : Lost foam casting process (LFC); Casting defects; Expandable polystyrene; Gray iron; Automotive parts; Mechanical tests.