SciELO - Scientific Electronic Library Online

 
vol.79 número174VIGAS DE MADERA LAMINADA REFORZADAS CON BAMBÚ: UNA ALTERNATIVA A VIGAS DE MADERA LAMINADA REFORZADAS CON FIBRA DE VIDRIODISEÑO Y EVALUACION DE UN RIEL HECHO DE MATERIAL REFORZADO CON FIBRA DE CARBONO PARA UN SISTEMA DE FIJACION EXTERNA índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


DYNA

versión impresa ISSN 0012-7353

Resumen

REYES-ORTIZ, OSCAR J.; ALVAREZ-LUGO, ALLEX E.  y  LIMON, PEDRO. EFFECT OF THE FAILURE CRITERION ON THE LABORATORY FATIGUE RESPONSE PREDICTION OF HOT-MIX ASPHALT MIXTURES. Dyna rev.fac.nac.minas [online]. 2012, vol.79, n.174, pp.31-39. ISSN 0012-7353.

The primary objective of this research was to determine the effect of the failure criterion, used to compute the laboratory fatigue response of hot mix asphalt (HMA) mixtures specified by the Institute of Urban Development of Bogota D.C. (i.e., md10 and md20 mixtures), on the fatigue response prediction. The fatigue equations (i.e., fatigue curves) were determined using the controlled-strain trapezoidal fatigue test. The criteria used to establish the fatigue life corresponded to the classic (50% of the initial load)-, damage-, and breakage-failure criterion. Corresponding results suggested that the failure criterion selection can lead to significant differences in the laboratory fatigue life prediction (i.e., fatigue curves). However, for the dense-graded md10 mixtures, the fatigue curve was similar in disregarding the failure criteria applied. On the contrary, for the dense-graded md20 mixtures, application of the three failure criteria led to significant differences in fatigue life prediction; the smallest load cycles to failure (most critical) was determined based on the classic criterion. Future research should focus on establishing the failure criterion to be used for subsequent pavement structural design, especially for asphalt mixtures with a maximum aggregate size of 20 mm or higher.

Palabras clave : Fatigue failure criterion; Fatigue equation; Hot mix asphalt; Trapezoidal fatigue test.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )