Servicios Personalizados
Revista
Articulo
Indicadores
Citado por SciELO
Accesos
Links relacionados
Citado por Google
Similares en SciELO
Similares en Google
Compartir
DYNA
versión impresa ISSN 0012-7353
Resumen
MARTINEZ-VERTEL, Jaime José et al. Polymer adsorption isotherms with NaCl and CaCl 2 on kaolinite substrates. Dyna rev.fac.nac.minas [online]. 2019, vol.86, n.210, pp.66-73. ISSN 0012-7353. https://doi.org/10.15446/dyna.v86n210.74361.
During polymer injection in enhanced oil recovery processes, polymeric molecules are attached to the rock surface as a result of a series of interactions between both components, leading to concentration decrease on the injected batch. This phenomenon, known as adsorption [18], can be estimated by analytical models and depends on several factors like the type of rock, degree of hydrolysis and polymer concentration, reservoir temperature, salinity of formation water, among other aspects. This paper shows the results of 144 statics tests where salinity (NaCl and CaCl 2 ) and polymer concentration were taken as the parameters to be changed in order to determine which analytical model is the most accurate for the prediction of experimental results. The abnormal adsorption tendency with NaCl, indicates that the grater salinity value, the lesser adsorption value concentrations. This is mainly due to the response of the kaolinite substrate to flocculation.
Palabras clave : enhanced oil recovery; polymer injection; analytical models; adsorption; flocculation..