SciELO - Scientific Electronic Library Online

 
vol.33 número3Influencia de la adición del inhibidor de corrosión y pH en las propiedades electroquímicas de filmes híbridos sobre acero galvanizadoEvaluación de la función de Green en simulación de registros sísmicos para ensayos dinámicos índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Ingeniería e Investigación

versión impresa ISSN 0120-5609

Resumen

GARCIA-SOTO, A. R; RODRIGUEZ-NINO, G  y  TRUJILLO, C. A. Zeolite LTA synthesis: Optimising synthesis conditions by using the modified sequential simplex method. Ing. Investig. [online]. 2013, vol.33, n.3, pp.22-27. ISSN 0120-5609.

This paper presents research concerning the simultaneous effect of the most influential synthesis variables in the preparation of Zeolite LTA. The simplex method was used for ascertaining optimal synthesis conditions, where the relative crystallinity (regarding a commercial sample) of synthesised zeolite was defined as response function. Crystallinity was measured by X-ray diffraction. Optimum conditions were found after 24 trials, giving 95.4% relative crystallinity and Na2O/SiO2=2.58, SiO2/Al2O3=1.45 and H2O/Na2O=46.92 molar ratios; 11.7 h crystal growth time, 6.1 h crystallisation time (reaction) and 78oC reaction temperature were found to be optimal synthesis conditions. A computer programme for simulating a zeolite phase diagram was designed to verify whether the molar ratios indicated by the optimisation algorithm were leading to the desired zeolite type. The results were compared to those in previous work where the fixed factor method was used.

Palabras clave : Zeolite LTA; crystallinity; simplex method; optimisation.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )