SciELO - Scientific Electronic Library Online

 
 número37Preparación, caracterización y evaluación de MgO para combustión sin llama de gas naturalEstudio de mezclas de polímeros reciclados para el mejoramiento de sus propiedades índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Revista Facultad de Ingeniería Universidad de Antioquia

versión impresa ISSN 0120-6230versión On-line ISSN 2422-2844

Resumen

MARTINEZ, Hader Vladimir; VALENCIA, Marco Fidel; CHEJNE, Farid  y  CRUZ, Javier. Compocasting of the ZA-27 alloy, reinforced with SiC particles. Rev.fac.ing.univ. Antioquia [online]. 2006, n.37, pp.50-58. ISSN 0120-6230.

Results obtained during the synthesis of ZA-27/β-SiC/xxp metal matrix composites are reported. These results are in line with other works conducted by the authors on ZA-27/C/xxp, Pb-Sn20%wt/SiC/xxp and Al-Cu8%wt/SiC/xxp. There are many kinds of commercially-available reinforcement particles. Nevertheless, for this research β-SiC particles obtained from wastes of rice husk have been used. The technique employed for fabrication of composites was Compocasting. It consisted on the design and construction of an experimental rheocaster, useful for semi-solid as well as particulate metal matrix composites processing. The characterization by mechanical tests and optical microscopy and comparison with the base alloy, allowed validation of the effects of different process variables and improvements in mechanical properties.

Palabras clave : compocasting; ZA-27; SiC; composite materials.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons