SciELO - Scientific Electronic Library Online

 
 número37Estudio de propiedades térmicas y mecánicas en espumas de mezclas poliméricas entre copolímero de etileno-acetato de vinilo (EAV) y caucho natural (CN)Recubrimientos de TiAlN sobre acero ASTM A36 por el proceso de sputtering reactivo RF índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Revista Facultad de Ingeniería Universidad de Antioquia

versión impresa ISSN 0120-6230versión On-line ISSN 2422-2844

Resumen

MEZA, J. M; DEVIA, A  y  VELEZ, J. M. The importance of RID and P Vs h curves on indentation studies of TiN films deposited onto M2 and 304L steels. Rev.fac.ing.univ. Antioquia [online]. 2006, n.37, pp.93-106. ISSN 0120-6230.

A hardness study of TiN films onto M2 and 304L steels applied by PAPVD was conducted in this work. Instrumented indentation and hardness equipments allow to asses this property. Crack patterns produced during these tests were correlated with this information. In addition, from the P-h/t (Load-displacement/film’s thickness) plots, called Relative Indenter Displacement plots, and P-h plots important information was obtained about the capacity of these systems for supporting load. Both graphics showed to be of great importance for understanding the mechanical response of these systems to indentation.

Palabras clave : mechanical properties; thin films; indentation; hardness; TiN; PAPVD.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons