SciELO - Scientific Electronic Library Online

 
 número44Producción de hidrógeno y nanotubos de carbono por escomposición de metano sobre Ni°/La2O3 obtenido a partir de la perovskita LaNiO3-δAnálisis de falla de la mordaza plana de una prensa hidráulica índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Revista Facultad de Ingeniería Universidad de Antioquia

versión impresa ISSN 0120-6230versión On-line ISSN 2422-2844

Resumen

FERNANDEZ, Patricia  y  RESTREPO, Oscar Jaime. Microstructural analysis of A356-T6 aluminum alloy on high tension connectors. Rev.fac.ing.univ. Antioquia [online]. 2008, n.44, pp.20-29. ISSN 0120-6230.

Some electrical companies have reported that during the service time, high tension connectors in energy transmission lines as well as power substations, there have been several cases where such elements exhibited an important decrease of their performance efficiency. Several studies have been carried out allowing the determination of changes in the mechanical and electrical properties of connectors caused by high levels of temperature reached for the circuits. In this paper we show the microstructural changes observed on an aluminum alloy A356-T6 (connectors manufacturing material) promoted by means thermal and electrical tests under simulated service conditions and their correlation to mechanical properties variations.

Palabras clave : Aluminum alloys; A356-T6; high tension connector; microstructural analysis; mechanical properties.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons