SciELO - Scientific Electronic Library Online

 
vol.22 número35Análisis de soldabilidad de aceros inoxidables con aceros de medio y bajo carbono por SMAWAplicación del estándar ISO/IEC 9126-3 en el modelo de datos conceptual entidad-relación índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Revista Facultad de Ingeniería

versión impresa ISSN 0121-1129

Resumen

PENA BALLESTEROS, Dario Yesid; ESTUPINAN DURAN, Hugo Armando; MORENO JAIMES, Ana María  y  SOTO GAMBOA, Diana Carolina. Corrosion behavior of Pb-Sn-Ca-Ag alloy in a sulfuric acid electrolyte. Rev. Fac. ing. [online]. 2013, vol.22, n.35, pp.101-112. ISSN 0121-1129.

In this work, a Pb-Ca-Sn-Ag alloy, used in the automobile battery grids manufacture was evaluated. Specifically, the temperature at 25, 35 and 45 °C effect, together with the immersion time, in 0.5 M sulfuric acid at 0,7 and 30 days, carried out by an electrochemical impedance spectroscopy. According the results, it was obtained the corrosion rate behavior. Additionally, with the XRD and SEM evidence, it was possible to conduct the corrosion products formed during the immersion in acid process' analysis. The results showed that the Pb-Ca-Sn-Ag alloy is not recommended to make grids for the automotive batteries.

Palabras clave : Pb-Sn-Ca-Ag Alloy; Corrosion Speed; Lead Batteries.

        · resumen en Español     · texto en Español     · Español ( pdf )