SciELO - Scientific Electronic Library Online

 
 número23Uso de ambientes virtuales y selección de parámetros de medidas en la aplicación para el tratamiento de fobiasModelo para la evaluación del desempeño de los proveedores utilizando AHP índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Ingeniería y Desarrollo

versión impresa ISSN 0122-3461versión On-line ISSN 2145-9371

Resumen

REYES-ORTIZ, Oscar J  y  CAMACHO-TAUTA, Javier. Grading Influence On Rutting In The Asphalt Mistures. Ing. Desarro. [online]. 2008, n.23, pp.26-42. ISSN 0122-3461.

The geotechnic engineering research group of the Universidad M. Nueva Granada, carried out a research about the performance of different bituminous mixes under the wheel tracking test when their gradations changes in the upper, middle and lower layer. Two sets of mixes were studied belonging to the Instituto Nacional de Vias (INVIAS) and the Instituto Distral Urbano (IDU). Previous testing, the granular material and the bitumen were studied in order to determine their properties, and the optimum rate of binder was determined using the Marshall test. Finally, specimens were made following the specifications found in the characterization tests and the wheel tracking test was applied. As a result, the only gradation that satisfies the specifications regarding the deformation velocity is the MD10. Furthermore, it has been found that the rutting is strongly related with the gradations and the compaction energy.

Palabras clave : rutting; asphalt mixture; gradations; rut speed.

        · resumen en Español     · texto en Español     · Español ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons