SciELO - Scientific Electronic Library Online

 
vol.19 número1Modelamiento de procesos hidrológicos aplicando técnicas de inteligencia artificial: una revisión sistemática de la literaturaLiberación controlada del Metoprolol Succinato a partir del complejo organo-mineral Metoprolol Succinato-Montmorillonita índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • En proceso de indezaciónCitado por Google
  • No hay articulos similaresSimilares en SciELO
  • En proceso de indezaciónSimilares en Google

Compartir


Iteckne

versión impresa ISSN 1692-1798

Resumen

NGANDU, Cornelius Ngunjiri. Compressive Strengths Prediction for Concrete with Partial Plastic Fine Aggregate using Neural Network and Reviews. Iteckne [online]. 2022, vol.19, n.1, pp.61-68.  Epub 09-Sep-2022. ISSN 1692-1798.  https://doi.org/10.15332/iteckne.v19i1.2548.

In recent past years, plastic waste has been a environmental menace. Utilization of plastic waste as fine aggregate substitution could reduce the demand and negative impacts of sand mining while addressing waste plastic challenges.

This study aims at evaluating compressive strengths prediction models for concrete with plastic-mainly recycled plastic-as partial replacement or addition of fine aggregates, by use of artificial neural networks (ANNs), developed in OCTAVE 5.2.0 and datasets from reviews. 44 datasets from 8 different sources were used, that included four input variables namely: -water: binder ratio; control compressive strength (Mpa); % plastic replacement or additive by weight and plastic type; and the output variable was the compressive strength of concrete with partial plastic aggregates.

Various models were run and the selected model, with 14 nodes in hidden layer and 320,000 iterations, indicated overall root mean square error (RMSE) , absolute factor of variance (R2), mean absolute error (MAE) and mean absolute percentage error (MAPE) values of 1.786 MPa, 0.997, 1.329 MPa and 4.44 %. Both experimental and predicted values showed a generally increasing % reduction of compressive strengths with increasing % plastic fine aggregate.

The model showed reasonably low errors, reasonable accuracy and good generalization. ANN model could be used extensively in modeling of green concrete, with partial waste plastic fine aggregate. The study recommends ANNs models application as possible alternative for green concrete trial mix design. Sustainable techniques such as low-cost superplasticizers from recycled material and cost-effective technologies to adequately sizing and shaping plastic for fine aggregate application should be encouraged, so as to enhance strength of concrete with partial plastic aggregates.

Palabras clave : Plastic; fine aggregates; compressive strength; prediction; concrete: artificial neural network; reviews.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )