Serviços Personalizados
Journal
Artigo
Indicadores
Citado por SciELO
Acessos
Links relacionados
Citado por Google
Similares em SciELO
Similares em Google
Compartilhar
DYNA
versão impressa ISSN 0012-7353versão On-line ISSN 2346-2183
Resumo
ALELVAN, Giovanna Monique et al. MPM and ALE simulations of large deformations geotechnics instability problems. Dyna rev.fac.nac.minas [online]. 2020, vol.87, n.212, pp.226-235. ISSN 0012-7353. https://doi.org/10.15446/dyna.v87n212.80975.
Problems involving large deformations are the focus of numerical modeling researches in recent decades due to the challenge of finding a kinematic appropriate description of the continuum. In recent years, different formulations have been used to describe such problems as the Arbitrary Lagrangian Eulerian (ALE) method and the Material Point Method (MPM). These two methods allow to perform dynamic analyzes involving large deformations. In this way, this work aims to present a comparison of problems applied to Geotechnics involving large deformations and large displacements, using MPM and FEM associated with the ALE method. For this purpose, three problems have been simulated: sliding of blocks on an inclined plane, runout process of sand and instability of a slope using the MPM and the FEM associated with the ALE method. In all cases, a comparison of the results is presented, and the advantages and disadvantages of each method are discussed.
Palavras-chave : large deformations; material point method; finite element method; arbitrary Lagrangian Eulerian.