Serviços Personalizados
Journal
Artigo
Indicadores
- Citado por SciELO
- Acessos
Links relacionados
- Citado por Google
- Similares em SciELO
- Similares em Google
Compartilhar
DYNA
versão impressa ISSN 0012-7353versão On-line ISSN 2346-2183
Resumo
MONAR-NARANJO, Martín; FREIRE-GUEVARA, Belén e SANCHEZ-POMBOZA, Cristhian. Analysis of the dimensional variation of 3D printed obje97676765567u7j cts (FMD) subjected to annealing postprocessing. Dyna rev.fac.nac.minas [online]. 2023, vol.90, n.225, pp.16-21. Epub 13-Jan-2024. ISSN 0012-7353. https://doi.org/10.15446/dyna.v90n225.103587.
The annealing process in FDM printing applying materials such as PLA and HTPLA, is a technique that looks for the improvement of the mechanical characteristics of post-printing products. The aim of the research is to determine the most suitable annealing process that does not generate significant changes in the dimension of the object. To this end, 108 test pieces were manufactured within the applied methodology, which were exposed to combined tests that considered variables such as the type of printing material, the fill level, temperature and coating. Once the experiment was carried out, it was concluded that the most suitable annealing process is in PLA or HTPLA material at 100% filler, exposed to 200°C with plaster stone coating.
Palavras-chave : annealing; postprocessing; dimensional variations.