Serviços Personalizados
Journal
Artigo
Indicadores
- Citado por SciELO
- Acessos
Links relacionados
- Citado por Google
- Similares em SciELO
- Similares em Google
Compartilhar
Revista Facultad de Ingeniería Universidad de Antioquia
versão impressa ISSN 0120-6230versão On-line ISSN 2422-2844
Resumo
OSSA, Edgar Alexander e PANIAGUA, Marco Aurelio. Failure analysis of a hydraulic press clamp. Rev.fac.ing.univ. Antioquia [online]. 2008, n.44, pp.30-35. ISSN 0120-6230.
This paper describes the analysis and investigation of the causes of the failure of an hydraulic press jaw face grip. Analysis of the fractured surfaces indicated the creation of cracks due to stress concentrators as a result of defective design. On the other hand, metallographic examination revealed the presence of aligned clusters of primary carbides that along with the stress concentrators induced the premature failure of the grip.
Palavras-chave : Clamping; grip; design failure; metallography; fractography.