Resumo

RESTREPO-ARCILA, Sandra Milena et al. Colour evolution of the oxide layer formed on the Au-25Fe AND Au-24.5Fe-0.5Co alloys. Rev.fac.ing.univ. Antioquia [online]. 2016, n.78, pp.62-68. ISSN 0120-6230.  https://doi.org/10.17533/udea.redin.n78a08.

The colour theory proposed by Heavens in 1991 has been applied to calculate the thickness of magnetite thin layers, Fe₃O₄, which were obtained by heat treatment at 250 °C in a gold alloy (Au-24.5Fe-0.5Co). The reflectance spectra obtained from the polished samples with different oxidation (and colour) degrees were used to calculate the real part of the refraction index and the (imaginary) extinction coefficients of both the metallic substrate (n₂, k₂) and the magnetite layer (n₁=2.42, k₁). The a+bλ+cλ² form was taken adjusting parameters between experimental and theoretical curves. The fitting of the data resulted in deviations between 2 and 10% for thicknesses in the range of 0 nm (only substrate) and 65 nm (dark blue colour). By means of a mathematic model and following the Heavens' theory, the thickness of each layer has been predicted with high precision, using the spectral reflectance. Consequently, we propose that by using this methodology, the values of the extinction coefficients of the oxide species can be easily obtained, and the thicknesses of the oxide layers can be predicted. The magnetite thickness values found in this study fall into the interval reported in the literature for first-order interference in steels, from light-yellow (~46 nm) to blue (~72 nm).

Palavras-chave : Magnetite; oxide layer; coloured gold alloys; colour theory.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )