Resumo

MONSALVE-POSADA, Juan F.; ARIAS-LONDONO, Alexander  e  MEJIA-ARANGO, Juan G.. Performance in wireless networks and industrial wireless networks on control processes in real time under industrial environments. TecnoL. [online]. 2015, vol.18, n.34, pp.87-99. ISSN 0123-7799.

The growing use of Ethernet networks on the industrial automation pyramid has led many companies to develop new devices to operate in requirements of this level, nowadays it is called Industrial Ethernet network, on the market there are various sensors and actuators to industrial scale equipped with this technology, many of these devices are very expensive. In this paper, the performance of two wireless networks is evaluated, the first network has conventional Ethernet devices, and the second network has Industrial Ethernet devices. For the process we vary four parameters such as distance, number of bytes, the signal to noise ratio, and the packet error rate, and then we measure delays and compare with metric statistics results, Box Plot graphs were used for the analysis. Finally, we conclude that under the parameters and conditions tested, wireless networks can serve as a communication system in control applications with allowable delays of up to 50 ms, in addition, the results show a better performance of Industrial Ethernet networks over conventional networks, with differences in the RTT of milliseconds. Therefore, it is recommended to establish what risk is for the process to control these delays to determine if the equipment conventional applies, since under certain features like humidity and temperature can operate properly for a considerable time and at lower cost than devices to Industrial Ethernet.

Palavras-chave : Industrial Ethernet; IWLAN; Control; Industrial Environment; Real Time.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )