Resumo

WILLS, Beatriz Amparo; CASTRO, Camilo César  e  CORREA, Mauricio Andrés. ASSESSMENT OF A CLARIFIER SLUDGE BLANKET AT LABORATORY SCALE. Rev.EIA.Esc.Ing.Antioq [online]. 2010, n.14, pp.53-65. ISSN 1794-1237.

In this paper, we report the results for the operation and performance of a laboratory-scale clarifier sludge blanket suspension hydraulic, through a series of experiments that used a 23 factorial design. Factors in the design included: turbidity of raw water, hydraulic load rate and type of coagulant. These factors could affect the formation of a blanket, and therefore, the system’s efficiency on the removing turbidity. Two types of coagulants -aluminum sulfate and C-325 (a cationic polymer)- were tested in two types of synthetic raw water prepared in the laboratory through the addition of kaolin with high (Type I with 100 NTU) and low (Type II with 15 NTU) turbidity. The system was operated with surface load rates of 30 and 70 m³/m².day. Results show that the best blanket was generated when the system was operated with Type I water and a hydraulic load rate of 70 m³/ m².day, with turbidity values in the effluent below 2 NTU.

Palavras-chave : sludge blanket clarifier; water purification; turbidity; experimental design; water treatment.

        · resumo em Português | Espanhol     · texto em Espanhol     · Espanhol ( pdf )