SciELO - Scientific Electronic Library Online

 
vol.27 issue2Landslide susceptibility mapping of Penang Island, Malaysia, using remote sensing and multi-geophysical methods author indexsubject indexarticles search
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • On index processCited by Google
  • Have no similar articlesSimilars in SciELO
  • On index processSimilars in Google

Share


Earth Sciences Research Journal

Print version ISSN 1794-6190

Earth Sci. Res. J. vol.27 no.2 Bogotá Apr./June 2023  Epub Mar 22, 2024

https://doi.org/10.15446/esrj.v27n2.103801 

Original articles

Vertical accuracy evaluation free access digital elevation models (DEMs): case Fergana Valley in Uzbekistán

Evaluación de precisión vertical de los Modelos Digitales de Elevación de acceso abierto: caso del Valle de Fergana, en Uzbekistán

Dilbarkhon Fazilova1  2  3 

Obidjon Arabov1 

1National University of Uzbekistan named after Mirzo Ulugbek, Department of geodesy and geoinformatics, 1000174, 4, University str., Tashkent, Republic of Uzbekistan

2Astronomical Institute of Uzbek Academy of Sciences, Space researches laboratory, 100052, 33, Astronomical str., Tashkent, Republic of Uzbekistan

3Tashkent State Technical University named after Islam Karimov, Department of Mine Surveying and Geodesy, Republic of Uzbekistan


ABSTRACT

In this study, the vertical accuracy of the Shuttle Radar Topography Mission Digital Elevation Model Versión 2.0 (SRTM30), the Advanced Spaceborne Thermal Emission and Reflection Radiometer Global DEM Version 2.0 (ASTER GDEM2), and Advanced Land Observing Satellite World 3D Digital Surface Model Version 2.1 (ALOS AW3D30) was statistically assessed using GPS data. The Fergana Valley area was chosen as a study region, where the land surface can reflect tectonic processes. The values of ellipsoidal heights of 27 points of the regional GPS network were chosen as reference data. The geometric approach using GPS/leveling data and EGM96 global geopotential model-based geoid undulations was applied for geoid surface fitting. The geoid height corrections range ranged from -0.66 m to 0.87 m. Root-Mean-Square errors of ~10.0 m, ~16.4 m, and ~6.6 m was obtained for SRTM30, ASTER GDEM2, and ALOS AW3D30, respectively. It was found that compared with the reference model, all the global DEMs in mountainous areas generally overestimated elevation and the value of vertical ac-curacy at a 90% confidence level by 3-6 meters exceeded the declared by distributors. But ALOS AW3D30 proved to be the most accurate DEM that best represents the topography of the earth's surface and could be used for some engineering applications in Fergana Valley.

Keywords: open-source DEMs; vertical accuracy; SRTM; ASTER GDEM2;ALOS AWD3D30; GPS; geoid undulations

RESUMEN

En este studio se evaluó estadísticamente la precisión vertical de los modelos digitales de elevación de la Misión Topográfica Shuttle Radar 2.0 (SRTM30), del sistema radiométrico de emisión y reflexión térmica espacial Terra Advanced 2.0 (ASTER GDEM2), y del Satélite de Observación Terrestre Mundial 3D 2.1 (ALOS AW3D30). El Valle de Fergana, en Asia Central, fue elegido como la región de estudio porque la superficie terrestre puede reflejar los procesos tectónicos. Para este trabajo se determinaron los valores de alturas elipsoidales de 27 puntos de la red regional GPS como valores de referencia. Para el ajuste geoidal de la superficie de estudio se aplicó la aproximación geométrica con los datos de nivelación GPS y el modelo geopotencial global EGM96, basado en ondulaciones geoidales. El rango de corrección de la altura geoidal se establece entre -0.66 m y 0.87 m. Con los modelos SRTM30, ASTER GDEM2 y ALOS AW3D30 se obtuvieron los errores de raíz cuadrada media de ~10.0 m, ~16.4 m, and ~6.6 m, respectivamente. Al compararse con el modelo de referencia se encontró que todos los modelos digitales de elevación en las áreas montañosas por lo general sobreestimaban la elevación y el valor de precisión vertical de un 90 % de exactitud excedía entre 3 y 6 metros el margen declarado por los distribuidores. Sin embargo, el modelo ALOS AW3D30 fue el modelo digital de elevación más preciso y que mejor representa la topografía de la superficie terrestre y que, por lo tanto, podría ser usado para algunas aplicaciones ingenieriles en el Valle de Fergana.

Palabras Clave: Modelos Digitales de Elevación de acceso abierto; precisión vertical; SRTM; ASTER GDEM2; ALOS AWD3D30; GPS; ondulaciones geoidales

1. Introduction

Digital elevation models (DEMs) are necessary for the solution of many practical problems in the areas of the earth and environmental sciences (such as tectonics, the study of landslides, mineral exploration, water and land resources management, disaster prevention, and others) in Uzbekistan (Sayyidkosimov & Kazakov, 2018; Sabitova et al., 2020; Sharipov et al., 2020; Khasanov & Ahmedov, 2021). Topographic maps, Global Navigation Satellite System (GNSS) measurements, photogrammetry techniques, and airborne laser scanning are the main data sources for DEMs production used in Uzbekistan for small areas (Takhirov et al., 2020; Shukina et al., 2022). Despite the accuracy, the traditional DEM generation methods are tedious and time-consuming for using over large areas. Modern satellite remote sensing technologies have made it possible to map large areas with minimal labor and technological costs (Smith &Clark, 2005). The widespread use of publicly available satellite-based DEMs such as SRTM, ASTER, and ALOS is an example of these benefits. However, available open-source these and many others have coarser resolutions. Their accuracy is affected by measurement error, data acquisition method, the instrument's capability, resolution, terrain type and relief, slope, roughness, land cover, and others (Mukherjee et al., 2011; Hu et al. 2017; Shetty et al., 2022). The vertical accuracy assessment of space-borne elevation data sets has been one of the major concerns for worldwide researchers (Mukherjee et al., 2013; Elkhrachy, 2018; González-Moradas & Viveen, 2020; Preety et al., 2022). For the practical application of the DEM, it is necessary to identify the influence of error sources on the vertical accuracy of the DEM and refine the models using terrestrial measurements for each area separately (Dragut & Eisank, 2011). Global DEMs have got an upsurge in their usage in Uzbekistan. But so far there are few works on assessing their accuracy and developing methods for improving it. In earlier studies, the accuracy of DEMs, such as SRTM, ASTER GDEM, and ALOS PALSAR, was assessed using various data (DEMs of higher resolution, the utilization of Differential Global Positioning System (DGPS), terrestrial measurements (Bakiev & Khasanov, 2021). It was revealed that for the territories located near the reservoirs, ASTER DEM gives a more realistic representation of steep slopes and mountain ridges compared to SRTM or ALOS (Fazilova et al., 2021). The goal of this study is to quantify and compare the vertical accuracy of open access DEMs obtained using the Shuttle Radar Topography Mission (SRTM30), Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER GDEM2), and Advanced Land Observing Satellite (ALOS AW3D30) for the territory of the Fergana Valley in the Republic of Uzbekistan.

2. Data and method

The area taken for the study is the territory of the Fergana Valley in Uzbekistan, which is an east-west-trending intra-orogenic intermountain depression, the most seismically active and densely populated region of the country. It is located in the eastern part of the Republic of Uzbekistan and borders the Republic of Tajikistan and Kyrgyzstan. The width of the research area is 370 km by 19 km. It is bounded by the Alai and Turkestan systems mountain uplifts in the south, by the Fergana Mountain in the northeast, and by the Chatkal-Kurama Mountain in the north and northwest (Umurzakov & Rabbimkulov, 2022). The maximum topographic relief between the Fergana Valley floor, with an altitude of roughly 330 m, and the surrounding mountain peaks is about 1000 m. The main problem for the territory of the republic, which has a complex relief, is the need for better knowledge of the geoid by gravimetric methods. The geoid of the Fergana Valley is the only area that has been sufficiently well studied by classic leveling. As a result, the influence of the Tien Shan and Pamir Mountain ranges on gravitational anomalies was revealed (Ustyantsev, 2011) (Fig.1). In the work, the entire territory of the Fergana Valley is considered from the point of view of the fact that for many geodetic engineering applications, the assessment of the accuracy of DEMs has not yet been made.

Figure 1 Topography of the study area generated by SRTM30 and distribution of GPS points over Fergana Valley 

The study utilized three sources of DEMs generated from various data acquisition techniques, namely Shuttle Radar Topography Mission (SRTM) DEM of 30 m, Advanced Space Borne Thermal Emission and Reflection Radiometer (ASTER)-Global DEM of 30 m, and ALOS World-3D of 30 m. The important technical details of DEMS are explained in Table 1.

Table 1 Description of digital elevation models (DEM) 

Data SRTM30 v. 2.0 ASTER GDEM v.2 ALOS World 3D
Source Space Shuttle Radar ASTER DAICHI/ALOS
Generator/Distributor NASA/USGS METI/NASA JAXA
Period of observation from February 11th, 2000 to February 22nd, 2000 March 1, 2000 - November 30, 2013 from 2006 to 2011
Spatial resolution (m) 30 30 30
Vertical datum EGM96 EGM96 EGM96
Horizontal datum WGS84 WGS84 WGS84
Data type Interferometry synthetic aperture radar Optical stereoscopy Optical stereoscopy
Vertical accuracy (LE90) < 10 m <15-20 m <7m

SRTM30 v. 2.0. It can be considered to be either an SRTM30 data set enhanced with GTOPO30 or an upgrade to GTOPO30. 1-arcsecond (about 30 meters) resolution DEM, delivered in 1°x1° tiles. Systematic interferometric data were collected for each terrain segment at least twice from different angles (on ascending, north-going, and descending orbit pass) to fill in areas shadowed from the radar beam by terrain. The finished product contains 'no-data' termed as voids where water or heavy shadow prevented the quantification of elevation. At a 90% confidence level, the vertical accuracy is expected to be 10 m (Rodríguez et al., 2006). Eight tiles of the SRTM30 elevation data for the study area were downloaded from https://www.usgs.gov/centers/eros website.

ASTER GDEM v.2 (ASTER GDEM2). The 1-arc-second (30 m) stereoscopic product ASTER GDEM2 was created by stacking all individual cloud-masked scene DEMs and non-cloud-masked scene DEMs, then applying various algorithms to remove abnormal data. The reason for considering this model is that ASTER GDEM2 has some advantage over SRTM30 because its stereo pair has more nadir view when collecting data in very steep and rugged terrain (Abrams et al., 2010). ASTER GDEM2 data has a vertical accuracy of ±15-20 m, depending on the region's environmental situation (Thomas et al.2014). For this study, 7 ASTER GDEM2 elevation data tiles were downloaded from https://asterweb.jpl.nasa.gov/gdem.asp website.

ALOS World 3D (AW3D30). The global digital surface model dataset with a horizontal resolution of approximately 30-meter mesh (1 arcsec. latitude and longitude) generated from 5 m resolution. The worldwide digital elevation model DEM and ortho-rectified image (ORI) were created using the archived information about the Panchromatic Remote Sensing Instrument for Stereo Mapping (PRISM). PRISM comprised three panchromatic radiometers that were procured along with track stereo images. It had a spatial resolution of 2.5 m in the nadir-looking radiometer and accomplished worldwide coverage, making it an appropriate potential candidate for exact worldwide DEM and ORI generation (Tadono et al., 2014). This is a non-standard version of the ALOS AW3D30 dataset provided in a WGS84 ellipsoidal vertical datum. For this study, 9 tiles of data were downloaded from https://www.eorc.jaxa.jp/ALOS/en/aw3d30/index.htm website.

The raster values (heights) of these DEMs were extracted from the coordinates of the GPS points. These heights are referred to as heights obtained from each of the DEMs.

The vertical accuracy of DEM at the scale of the study area is verified using 27 reference stations of the State Satellite Geodetic Network (SSGN) in the region, which is developing quite rapidly, considering the developed infrastructure of the country (Fazilova, 2022). To date, only these points of SSGN have been installed in the region (Fig. 1). These points are the so-called "common points," with the values of normal heights in the Baltic system of 1977 available in the database of the International Gravimetric Bureau in Toulouse (Drewes et al., 2016). Measurements of other global navigation satellite systems (GNSS) such as GLONASS, Galileo, and Beidou are currently not available at the stations. The GAMIT/GLOBK software package version 10.71 was used to calculate the coordinates of points (Herring et al., 2018). According to Dong et al. (1998), processing was carried out according to the recommendations and standards of the International Earth Rotation Service IERS2010 (IERS, 2010). The ITRF2014 coordinate system (Altamimi et al., 2016) was chosen as the reference coordinate system for the regional solution. The coordinate component residuals' weighted RMS (WRMS) value was 1.03.2 mm and 3.2-6.5 mm for horizontal and vertical components, respectively.

The quality of the DEM is a primary requirement from the various processing steps, the interpolation used for resampling, and the local properties (land cover and slope). Typically, the quality assessment includes two approaches, namely with (external) or without (internal) reference data set. The DEM is compared with a reference data set (external validation). In contrast, in the second case, inconsistencies are sought within the DEM itself with no reference data (internal validation) (Polidorit & Hage, 2020). The vertical accuracy can be directly estimated by comparing the heights extracted from a DEM and their values interpolated to the location of the GPS points. In order to make a consistent comparison of GPS surveys with SRTM, ASTER, and ALOS DEMs, all measurements must refer to the same horizontal coordinate system and vertical datum. The datum of the GPS's height is the ellipsoidal surface based on the World Geodetic System 1984 (WGS84) reference ellipsoid. For SRTM, ASTER, and ALOS DEMs, each grid cell's horizontal and vertical coordinates referenced to WGS84 and EGM96 (Lemoine et al., 1997) were output as a text file. Then elevations were transformed to ellipsoid heights (h) relative to WGS84 using EGM96 derived geoid undulations (N) by algebraic summation:

The geoid undulations according to the EGM96 global geopotential model can be determined using the service of the International Center for Global Earth Models (ICGEM) (Barthelmes & Kó'hler, 2016). The practical application of equation (1) to determine the required normal heights is complicated by a number of factors, including random errors (noise) in determining the heights, the difference in relevance for different types of heights, and insufficient knowledge of the relationship between them, geodynamic phenomena (soil subsidence, deformation of tectonic plates near subduction zones, etc.).

By the extensive use of GPS technique with geodetic aims, great interest has been collimated to the precise determination of local/regional geoid with an aim to replace levelling measurements with GPS surveys. Geoid models derived from the global geopotential models (such as EGM2008, EIGEN-6C4, EGM96) are the one alternative solution, but their accuracy needs to be estimated first for tectonic territories like Fergana Valley. There are two approaches for the transformation: gravimetrically determined geoid model, and interpolation between geometrically derived geoid heights where GPS measurements have been collocated with benchmarks. The gravimetric method offers benefits for areas with a homogeneous coverage of terrestrial data, but it is involving mathematical and computational procedures (Featherstone et al., 1998). The geometric approach has been widely used for a relatively small area, which interpolates geoid heights based on the GPS-derived heights and leveled heights at some points (Zhong, 1997; Erol & Çelik, 2004; Rabah & Kaloop, 2013; Ligas & Kulczycki, 2018; Dawod & Abdel-Aziz, 2020). The global geoid models like EGM96 can achieve the accuracy of regional or local geoid models by this method. It is used to determine the shortwave and ultra-shortwave components of the geoid, to improve of accurate geopotential models (Erol & Celik, 2004; Soycan, 2014). Early studies used the method due to its efficiency for local areas with poor knowledge of the geoid. The high accuracy of the estimation, especially for engineering surveys, is shown (Mishra & Ghosh, 2017; Jassim & Yousef, 2021). To improve its accuracy parametric models (or a corrective surface) introduced when refining heights (Fotopoulos et al., 2003). Such models include high-order polynomials with interpolation with different basis functions (Zhao et al., 2022), least squares collocation (Lyszkowicz et al., 2014), finite element method (Zaletnyik et al., 2007), Fourier series (Grigoriadis et.al., 2021), and artificial neural networks (Konakoglu & Akar, 2021). Interpolation methods (such as inverse distance weighting, bilinear interpolation, polynomial regression, triangulation, radial basis functions and nearest-neighbor interpolation) were considering according the application area, surface features, distribution of data and their accuracy. Early studies are devoted to assessing the accuracy of the employed calculation method of the geoid as well as the accuracy, density, and distribution of the used data. Polynomial, least squares collocation, multiquadric (MQ) methods had the best results for geoid undulation calculation. The results confirmed that the radial basis functions (RBF) method is the popular approach to interpolate irregularly spaced data. Especially RBF with multiquadric (MQ) function gives the lowest standard deviation and noise level for the prediction of gravity anomalies, distortion modeling (Soycan, 2014; Doganalp & Selvi, 2015). We use RBF with MQ function interpolator for construction of the surfaces in the work.

The improvement of EGM96 model is based on the corrector surface fitting (CSF) algorithm and consists of several steps. The first step calculates the difference between the GPS/leveling geoid heights N GPS /leveling and the geoid height according to EGM96 N EGM 96 at each control "common point" (i=1...27) (Soycan, 2014):

The second step is to define the trend T based on the calculated differences, which is approximated by a polynomial or harmonic series. In our case, we chose a 3-parametric trend solution for a first-order polynomial:

where α 0 represent a bias, α 1, α 2 represent tilt of the geoid plane with respect to WGS84 ellipsoid, while j i , and l are the are the northings and eastings in some plane coordinate system. CSF dN i values was defined by removing the polynomial trend from the value of DN i :

The refined values of EGM96 geoid height anomalies are determined by the expression:

Vertical accuracy of DEMs was assessed statistically using GPS data based on point-wisely analysis. The surface continuity is a crucial issue in local geoid modeling. In this regard, the results of this study make a significant contribution to the practical use of local geoids. Therefore, we performed the construction of the surface grid using RBF with MQ function interpolation method. Using the 1'x1' EGM96 global geoid height (Fig. 2a) and 1'x1' the geoid corrector grid surfaces (Fig. 2b) were constructed for the study area. The geoid height corrections range ranged from -0.66 m to 0.88 m.

Figure 2 (a) EGM96 geoid undulations and (b) the corrector surface for geoid fitting 

3. Results and discussion

The ellipsoidal heights had been calculated using the corrected EGM96 geoid undulations for all three DEMs at 27 points. The descriptive statistics of ellipsoidal heights from each data source range (min, max), the measures of central tendency (mean), and the dispersion (standard deviation, SD) are shown in Table 2.

Table 2 Summary statistics of DEMs for the study area 

Min, m Max, m Mean, m SD, m Equation of correlation GPS and DEM Coefficient of correlation R2
GPS 330.080 836.060 485.922 150.833 - -
SRTM30 324.284 823.250 476.552 147.652 y = 0.989x - 4.182 0.9996
ASTER 326.362 808.831 470.957 147.131 y = 0.985x -7.736 0.9981
ALOS AW3D30 324.771 830.344 479.847 149.187 y = 0.999x -5.914 0.9997

For all models, the average elevation was found to be varying between 471 m and 480 m and is also comparable to the reference GPS value of 486 m. At the same time, the linear correlation coefficient between the reference surface and all three DEMs is at the level of 99% and confirms at first glance that the models do not have significant discrepancies from the reference data. Next, we analyzed the differences between the DEM surfaces and the reference surface from GPS measurements. For this, the differences of the grids (GPS-SRTM30), (GPS-ASTER GDEM2) and (GPS-ALOS AW3D30) were determined (Fig. 3 (a-c)). We can observe that compared with the reference model, all the global DEMs in mountainous areas generally overestimated elevation. But the range of elevations the ALOS AW3D30 versus GPS elevations are from 1.5 m to 10.64 m, that compared to the SRTM30 and ASTER GDEM2 elevations is two times less.

Figure 3 Surfaces of residuals of ellipsoidal heights according to DEM and GPS: (a) SRTM30, (b) ASTER GDEM2, (c) ALOS AW3D30, and (d) comparative statistics of DEMs 

The vertical errors of the DEMs were quantified by comparing individual test DEM elevations and reference GPS elevations at sample points by using the following metrics. The first, root mean square error (RMSE), characterizes the difference between the DEM values Z MODEL and the reference ones (Z GPS in our case). The Mean Error (ME) will estimate of the offset from the reference model. In fact, the absolute vertical accuracy of LE90 at a 90% confidence level (LE90) can be estimated based on the obtained RMSE (Mukherjee et al., 2013):

The performance of the DEM over the study region is shown in Fig3d. SRTM30 and ALOS AW3D30 DEM have the least error with ME and RMSE of 9.4 m and 10.0 m for SRTM30 and 6.1 m and 6.6 m for ALOS AW3D30, respectively. ASTER GDEM2 has the highest RMSE of 16.4 m. Comparison of GPS measurements at Fergana Valley with DEMs indicated that LE90 were about 16.4 m, 26.9 m, and 10.9 m for SRTM30, ASTER GDEM2, and ALOS AW3D30, respectively. From Fig. 3d, it can be visualized that, for the Fergana Valley the absolute vertical accuracy error (LE90) of all three DEMs is close to that declared by the manufacturers (LE90distrib), but slightly worse. These variation in the accuracy defines the role of tectonic and terrain features in measurement of elevation irrespective of their spatial resolution. The values implied that ALOS AW3D30 elevations approximated Earth's surface elevations better than SRTM30 and ASTER GDEM2 at the region.

4. Conclusions

In this work, for the first time for the territory of the Fergana Valley in Uzbekistan, the vertical accuracy of three publicly available DEMs, SRTM30, ASTER GDEM2, and ALOS AW3D30 was statistically assessed using high accuracy GPS survey data. The geometric approach using GPS/leveling data and EGM96 global geopotential model-based geoid undulations was applied for local geoid modeling. The geoid height corrections range ranged from -0.66 m to 0.87 m. Root-Mean-Square errors of ~10.0 m, ~16.4 m, and ~6.6 m was obtained for SRTM30, ASTER GDEM2, and ALOS AW3D30, respectively. It was found that compared with the reference model, all the global DEMs in mountainous areas generally overestimated elevation and the value of vertical accuracy at a 90% confidence level by 3-6 meters exceeded the declared by distributors. But the range of elevations the ALOS AW3D30 versus GPS elevations are from 1.5 m to 10.64 m, that compared to the SRTM30 and ASTER GDEM2 elevations is two times less. ALOS AW3D30 proved to be the most accurate DEM that best represents the topography of the earth's surface and could be used for some engineering applications in Fergana Valley. In future works, we intend to perform a more detailed morphometric analysis (slope and aspect) for applications of tectonics, hydrology and other applications.

Acknowledgments

This work was carried out within the scientific project of the Astronomical Institute of Uzbekistan with the financial support of the Academy of Sciences of the Republic of Uzbekistan. GNSS data were processed using the GAMIT/ GLOBK software. We also thank the reviewers for their many constructive comments and suggestions.

References

Abrams, M., Bailey, B., Tsu, H. & Hato, M. (2010). The ASTER Global DEM. Photogrammetric Engineering and Remote Sensing, 76(4), 344-348. [ Links ]

Altamimi, Z., Rebischung, P., Métivier L., & Collilieux, X. (2016). ITRF2014: A New Release of the International Terrestrial Reference Frame Modeling Nonlinear Station Motions. Journal of Geophysical Research: Solid Earth, 121(8), 6109-6131. https://doi.org/10.1002/2016JB013098Links ]

Bakiev, M., & Khasanov, K. (2021). Comparison of digital elevation models for determining the area and volume of the water reservoir. International Journal of Geoinformatics, 17(1), 37-45. https://doi.org/10.52939/ijg.v17i1.1705Links ]

Barthelmes, F., & Kòhler, W. (2016). International Centre for Global Earth Models (ICGEM). Journal of Geodesy, 90, 907-1205. https://doi.org/10.1007/s00190-016-0948-zLinks ]

Dawod, G. M., & Abdel-Aziz, T. M. (2020). Utilization of geographically weighted regression for geoid modelling in Egypt. Journal of Applied Geodesy, 14(1), 1-12. https://doi.org/10.1515/jag-2019-0009Links ]

Doganalp, S., & Selvi, H. Z. (2015). Local geoid determination in strip area pro-jects by using polynomials, least-squares collocation and radial basis functions. Measurement, 73, 429-438. https://doi.org/10.1016/j.measurement.2015.05.030Links ]

Dong, D., Herring, T. A., & King, R. W. (1998). Estimating Regional Deformation from a Combination of Space and Terrestrial Geodetic Data. Journal of Geodesy , 72, 200-214. http://dx.doi.org/10.1007/s001900050161Links ]

DràguJ, L., & Eisank, C. (2011). Object representations at multiple scales from digital elevation models. Geomorphology, 129(3-4), 183-189. https://doi.org/10.1016/j.geomorph.2011.03.003Links ]

Drewes, H., Kuglitsch, F., Adam, J., & Rozsa, S. (2016). The International Gravimetric Bureau. Journal of Geodesy , 90(10), 1186-1190. https://link.springer.com/content/pdf/10.1007/s00190-016-0948-z.pdf (last accessed September 2022) [ Links ]

Elkhrachy, I. (2018). Vertical accuracy assessment for SRTM and ASTER Digital Elevation Models: A case study of Najran city, Saudi Arabia. Ain Shams Engineering Journal, 9(4), 1807-1817. https://doi.org/10.1016/j.asej.2017.01.007Links ]

Erol, B., & Çelik, R. N. (2004). Modelling local GPS/levelling geoid with the assessment of inverse distance weighting and geostatistical kriging methods, 20th ISPRS Congress, Technical Commission IV, Istanbul, Turkey, 76. https://www.isprs.org/proceedings/xxxv/congress/comm4/papers/319.pdf (last accessed September 2022) [ Links ]

Fazilova, D. (2022). Uzbekistan coordinates system transformation from CS42 to WGS84 using deformation grid model. Geodesy and Geodynamics, 13(1), 24-30. https://doi.org/10.1016/j.geog.2021.10.001Links ]

Fazilova, D., Magdiev, Kh., & Sichugova, L. (2021). Vertical accuracy assessment of open access digital elevation models using GPS. International Journal of Geoinformatics , 17(1), 19-26. https://doi.org/10.52939/ijg.v17i1.1701Links ]

Featherstone, W. E., Dentith, M. C., & Kirby, J. F. (1998). Strategies for the ac-curate determination of orthometric heights from GPS. Survey Review, 34(267), 278-296. https://doi.org/10.1179/sre.1998.34.267.278Links ]

Fotopoulos, G., Featherstone, W. E. & Sideris, M. G. (2003). Fitting a gravimetric geoid model to the Australian Height Datum via GPS data. In: Tziavos, I. N. (Editor). Gravity and Geoid, Department of Surveying and Geodesy, Thessaloniki, Greece, 173-178. https://www.academia.edu/17367541/Fitting_a_gravimetric_geoid_model_to_the_Australian_Height_Datum_via_GPS_data (last accessed September 2022) [ Links ]

González-Moradas, M. D. R., & Viveen, W. (2020). Evaluation of ASTER GDEM2, SRTMv3.0, ALOS AW3D30 and TanDEM-X DEMs for the Peruvian Andes against highly accurate GNSS ground control points and geomorphological-hydrological metrics. Remote Sensing of Environment, 237, 111509. https://doi.org/10.1016/j.rse.2019.111509Links ]

Grigoriadis, V., Vergos, G., Barzaghi, R., Carrion, D., & Koc, O. (2021). Collocation and FFT-based geoid estimation within the Colorado 1 cm geoid experiment. Journal of Geodesy , 95, 52 https://doi.org/10.1007/s00190-021-01507-7Links ]

Herring, T. A., King, R. W., Floyd, M. & McClusky, S. C. (2018). Introduction to GAMIT/GLOBK. Release 10.7. Technical report. Massachusetts Institute of Technology, Massachusetts Institute of Technology, http://geoweb.mit.edu/gg/Intro_GG.pdf (last accessed September 2020) [ Links ]

Hu, Z., Peng, J., Hou, Y., & Shan, J. (2017). Evaluation of Recently Released Open Global Digital Elevation Models of Hubei, China. Remote Sensing of Environment, 9, 262. https://doi.org/10.3390/rs9030262Links ]

IERS Conventions. (2010). (IERS Technical Note 36) / ed. by G. Petit, B. Luzum. Frankfurt am Main: Verlag des Bundesamts für Kartographie und Geodásie, 179 pp, Frankfurt am Main: Verlag des Bundesamts für Kartographie und Geodásie, 179 pp, https://iers-conventions.obspm.fr/content/tn36.pdf (last accessed September 2022) [ Links ]

Jassim, M. A. & Yousef, M. M. (2021). Local Geoid Model Generation Using the Geometrical Approach. Journal of Civil Engineering and Architecture, 15, 437-445. https://doi.org/10.17265/1934-7359/2021.08.005Links ]

Konakoglu, B. & Akar, A. (2021). Geoid undulation prediction using ANNs (RB-FNN and GRNN), multiple linear regression (MLR), and interpolation methods: A comparative study. Earth Sciences Research Journal, 25(4), 371-382. https://doi.org/10.15446/esrj.v25n4.91195Links ]

Khasanov, Kh., & Ahmedov, A. (2021). Comparison of Digital Elevation Models for the designing water reservoirs: a case study Pskom water reservoir. E3S Web Conf. 264 03058. https://doi.org/10.1051/e3s-conf/202126403058Links ]

Lemoine, F. G., Smith, D. E., Kunz, L., Smith, R., Pavlis, E. C., Pavlis, N. K., Klosko, S. M. (...) Nerem, R. S. (1997). The Development of the NASA GSFC and NIMA Joint Geopotential Model. In: Segawa, J., Fujimoto, H., Okubo, S. (Eds.) Gravity, Geoid and Marine Geodesy. International Association of Geodesy Symposia, vol 117. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-03482-8_62Links ]

Ligas, M., & Kulczycki, M. (2018). Kriging and moving window kriging on a sphere in geometric (GNSS/levelling) geoid modelling. Survey Review , 50(359), 155-162. https://doi.org/10.1080/00396265.2016.1247131Links ]

Lyszkowicz, A., Birylo, M., & Becek, K. (2014). A new geoid for Brunei Darussalam by the collocation method. Geodesy and cartography, 63(2), 183-198. https://doi.org/10.2478/geocart-2014-0013Links ]

Mishra, U. N., & Ghosh, J. K. (2017). Development of a Geoid Model by Geometric Method. Journal of The Institution of Engineers (India): Series A, 98, 437-442. https://doi.org/10.1007/s40030-017-0250-yLinks ]

Mukherjee, S., Garg, R. D. & Mukherjee, S. (2011). Effect of Systematic error on DEM and its derived attributes: a case study on Dehradun area using Cartosat-1 stereo data. Indian Journal of Landscape System and Ecological Studies, 34, 45-58. [ Links ]

Mukherjee, S., Joshi, P., Mukherjee, S., Ghosh, A., Garg, R., & Mukhopadhyay, A. (2013). Evaluation of vertical accuracy of open-source Digital Elevation Model (DEM). International Journal of Applied Earth Observation and Geoinformation, 21, 205-217. https://doi.org/10.1016/j.jag.2012.09.004Links ]

Polidori, L., & Hage, M. (2020). El Digital Elevation Model Quality Assessment Methods: A Critical Review. Remote Sensing of Environment , 12, 3522. https://doi.org/10.3390/rs12213522Links ]

Preety, K., Prasad, A. K., Varma, A. K., & El-Askary, H. (2022). Accuracy Assessment, Comparative Performance, and Enhancement of Public Domain Digital Elevation Models (ASTER 30 m, SRTM 30 m, CARTOSAT 30 m, SRTM 90 m, MERIT 90 m, and TanDEM-X 90 m) Using DGPS. Remote Sensing of Environment , 14, 1334. https://doi.org/10.3390/rs14061334Links ]

Rabah, M., & Kaloop, M. (2013). The use of minimum curvature surface technique in geoid computation processing of Egypt. Arabian Journal of Geosciences, 6(4), 1263-1272. https://doi.org/10.1007/s12517-011-0418-0Links ]

Rodriguez, E., Morris, C. S. & Belz, J. E. (2006). A Global Assessment of the SRTM Performance. Photogrammetric Engineering & Remote Sensing, 3, 249-260. https://doi.org/10.14358/PERS.72.3.249Links ]

Sabitova, N., Stelmakh, A., & Tajibaeva, N. (2020). Mapping of landslides and landslide processes in Uzbekistan using relief plastics (on the example of the Chirchik basin). InterCarto. InterGIS. 26, 572-583. https://doi.org/10.35595/2414-9179-2020-1-26-572-583Links ]

Sayyidkosimov, S., & Kazakov, A. (2018). Forecast of probability of shock hazard in conditions of underground development of Zarmitan gold deposit zones. In: Litvinenko, V. (Ed.). Geomechanics and Geodynamics of Rock Masses. ISRM European Rock Mechanics Symposium - EUROCK 2018, St. Petersburg, Russia, 499-504. https://doi.org/10.1201/9780429449222Links ]

Sharipov, Sh., Shomurodova, Sh., & Gudalov, M. (2020). The use of the mountain kars in the tourism sphere in cort and recreation zone of Chimgan-Charvak. Journal of Critical Reviews, 7(3), 475-481. http://dx.doi.org/10.31838/jcr.07.03.87Links ]

Shetty, S., Vaishnavi, P. C., Umesh, P., & Shetty, A. (2022). Vertical accuracy assessment of open-source digital elevation models under varying elevation and land cover in Western Ghats of India. Modeling Earth Systems and Environment, 8, 883-895. https://doi.org/10.1007/s40808-021-01119-2Links ]

Smith, M. J. & Clark, C. D. (2005). Methods for the visualization of digital elevation models for landform mapping. Earth Surface Processes and Land-forms, 30(7), 885-900. https://doi.org/10.1002/esp.1210Links ]

Shukina, O., Muborakov, K., Ruziev, A., Yakubov, G., & Ergashev, M. (2022). Using Digital Photogrammetry to Create Large-Scale Topographic Maps and Plans in Uzbekistan. International Journal of Geoinformatics , 18(1), 37-42. https://doi.org/10.52939/ijg.v18i1.2103Links ]

Soycan, M. (2014). Improving EGM2008 by GPS and leveling data at local scale. Boletim de Ciências Geodésicas, 20(1), 3-18. https://doi.org/10.1590/s1982-21702014000100001Links ]

Tadono, T., Ishida, H., Oda, F., Naito, S., Minakawa, K., & Iwamoto, H. (2014). Precise Global DEM Generation by ALOS PRISM. ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 2(4), 71-76. https://doi.org/10.5194/isprsannals-II-4-71-2014Links ]

Takhirov, Sh., Aripov, I., & Matrasulov, D. (2020). Real-time structural monitoring of Bibi-Khanum in Samarkand (Uzbekistan) combined with subsequent laser scans. In: SAHC. https://www.scipedia.com/public/Takhirov_et_al_2021a (last accessed September 2022) [ Links ]

Thomas, J., Joseph, S., Thrivikramji, K., & Arunkumar, K. (2014). Sensitivity of digital elevation models: The scenario from two tropical mountain river basins of the Western Ghats, India. Geoscience Frontiers, 5(6), 893-909. https://doi.org/10.1016/j.gsf.2013.12.008Links ]

Umurzakov, R. & Rabbimkulov, S. (2022). Possibilities of mapping neotectonic elements based on the interpretation of space images: A study of Fergana Depression. Geodesy and Geodynamics , 13(6), 602-608. https://doi.org/10.1016/j.geog.2022.06.003Links ]

Ustyantsev, V. N. (2011). The mechanism of formation of the structure of the Earth system. On the role of stationary energy centers in maintaining the dynamic balance of the Earth system. Geotectonic. http://geo.web.ru (accessed 07.02.2022) (in Russian). [ Links ]

Zaletnyik, P., Volgyesi, L., Kirchner, I. & Paláncz, B. (2007). Combination of GPS/ leveling and the gravimetric geoid by using the thin plate spline interpolation technique via finite element method. Journal of Applied Geodesy , 1(4), 233. https://doi.org/10.1515/jag.2007.025Links ]

Zhao, Y., Ye, S., Chen, X., Xia, Y., & Zheng, Z. (2022). Polynomial Response Sur-face based on basis function selection by multitask optimization and ensemble modeling. Complex & Intelligent Systems, 8, 1015-1034. https://doi.org/10.1007/s40747-021-00568-7Links ]

Zhong, D. (1997). Robust estimation and optimal selection of polynomial parameters for the interpolation of GPS geoid heights. Journal of Geodesy , 71(9), 552-561. https://doi.org/10.1007/s001900050123Links ]

How to cite this item: Fazilova, D., & Arabov, O. (2023). Vertical accuracy evaluation free access digital elevation models (DEMs): case Fergana Valley in Uzbekistan. Earth Sciences Research Journal, 27(2), 85-91. https://doi.org/10.15446/esij.v27n2.103801

Received: July 19, 2022; Accepted: May 17, 2023

Corresponding Author: dilbar@astrin.uz

Creative Commons License This is an open-access article distributed under the terms of the Creative Commons Attribution License