Services on Demand
Journal
Article
Indicators
Cited by SciELO
Access statistics
Related links
Cited by Google
Similars in SciELO
Similars in Google
Share
Ingeniería y Ciencia
Print version ISSN 1794-9165
Abstract
OSORIO, Amalia; SALCEDO, Juana and COGOLLO, Rafael. Al2O3 sintered pellets as thermoluminescent dosimeters. ing.cienc. [online]. 2012, vol.8, n.15, pp.47-64. ISSN 1794-9165.
Verification of the radiation doses received by the area exposed during medical treatment is essential for assessing any scheme radiotherapy. This work describes the characteristic thermoluminescent (TL) of sintered Al2O3 pellets, for its use as dosimeter dose low. Sintered Al2O3pellets under different calcinations with a diameter of 5 mm and a thickness of 1 mm, they were irradiated to different dose using an unit of 60Co Theratron 780C® in air to ambient temperature. The reading was carried in a Harshaw TLD 4500. The main dosimetric properties of the material (glow curve, response reproducibility, reutilization, linearity and fading) have been studied in detail. The glow curve of the thin sintered Al2O3 pellets presents an intense peak TL to about 165 °C, which can be used for dosimetry. The results show that the pellets can be used in quality control programs as thermoluminescent dosimeter in therapeutic dose range. The importance of this work is that the aluminum oxide (α-Al2O3) is a promising alternative in TL materials used for dosimetry "in vivo" within quality control programs.
Keywords : Al2O3; dosimetry; thermoluminescence.